Trade Approvals

Equipment Trade Approvals

This page lists the National Standards Commission trade approval certificates that have been issued to A&D Weighing. A&D Weighing can test and certify all products in their range that are approved for trade use by the National Standards Commission or National Measurement Institute of Australia.

Model or SeriesCertificate
GP-12KA; GP-20KA; GP-22KA; GP-30KA; GP-32KA; GP-60KA; GP-100KA; GP-102KA6/4C/220
GF Series, GX Series, GX-K Series6/4C/219
EW-i Series6/4C/230
AD4405; AD4406; AD4407S451
AD4402; AD4404S503
SK-WP6/4C/216
SJ Series6/4C/255
LCM-13 SeriesS446
LC4102-K030 Load CellS484
A&D 1506/9C/250A
OHT6006/18/17C
ELP 3000, A&D 3000, ELP 1200, ADM Weighbeams6/9C/220B
AD4322MKIIS250B
AD4326A/B; AD4327A/BS314
AD4323; AD4323DR; AD4324; AD4325S251A
FG SERIES (Prior to 2005)6/4C/81A
FZ; FZ-WP SERIES6/4C/269
FG-K Series (New Models since 2005)6/9C/289
SW (Super Washdown) SERIES6/4C/274
SC (Wet Area Scale) SERIES6/4C/276
SE (Wet Area Scale) SERIES6/4C/276
HV150KA1; HV150KB1; HV150KB1WP; HV60KA1; HV60KB1; HV60KB1WP; HV30KA2; HV30KB2; HV30KB2WP; HW300KA4; HW300KB46/9C/250A
LC5217 (Certificate has lapsed, applicable to replacements only)S446
SA-156/4D/284
HV-G SERIES (including HVG-WP)6/9C/268
AD4329S387
AD4328S343A
SF/SG Series; CW Series; SW (Simple Weighing Retail) Series6/4D/291
AD4401S362
AP-30 MKII, AP-30MKIII, AP30-i6/4C/210
EK-i6/4C/243
LCC11 Load CellS410
FS-i Series6/4C/250
SB Basework Series6/9C/291

Trade Certification

A&D Weighing can test and certify all products in their range that are approved for trade use by the National Standards Commission or National Measurement Institute of Australia.

South Australian Department of Consumer and Business Affairs Certificate of Compliance for TradePrice (nett)
Instruments not exceeding 60 kg capacity$85.00
Instruments exceeding 60 kg but not exceeding 220 kg capacity$100.00
Instruments exceeding 220 kg but not exceeding 500 kg capacity$120.00
Instruments exceeding 500 kg but not exceeding 1000 kg capacity$150.00
Instruments exceeding 1000 kg but not exceeding 3000 kg capacity$180.00
Instruments exceeding 3000 kg but not exceeding 5000 kg capacity$350.00

Testing is conducted at an A&D Weighing Service Department. Certification will be enclosed in the carton with goods when despatched.

Not suitable for GF Series Balances, OHT Track & Weighbeam Scales – On site certification recommended.
Pricing is the nett price, no discount is applicable

Prices do not include GST